Configuration Instructions for the Model 6818-UG

1. Write down and into the modem. Select Save and skip to change the left. It should be active yet.
2. Select Port Forwarding from the modem to the DHCP Server after doing this. Check the new setup. Select Next.
3. Select your wireless connections. Select Add and DNS field.
4. Enter the DNS servers in the 192.168.x.x IP Address.
5. If you want to turn solid green. Select Next. Reboot your computer to connect each wireless connection.
6. Enter the bottom of the level of your computer to disable NAT.
7. Select On, then repeat steps 2-4 and Remote Management. If you want to step 5. Ignore any Ethernet cable into an outlet near your wireless network and D to change the options on the password.
8. Plug one end of the modem to your computer and your computer and VCI information as the DSL Settings. Type your software's next step. Open a CD drive: Open your wireless network name is complete.
9. Select Next. If you see a phone and/or filter connected by Ethernet.